The challenge facing every facility manager is the same: how to pack maximum training utility into minimum floor square footage. This squat rack, built on a 50x70x2.5mm steel foundation, answers that question through modularity rather than monolithic design. Unlike welded racks that commit a facility to a fixed footprint, this unit accepts detachable, universal accessories that reconfigure the training experience without requiring additional equipment purchases.
The satin black powder coat finish serves more than aesthetics. In commercial environments with high humidity, temperature swings, or frequent cleaning protocols, the coating provides corrosion resistance that bare or painted steel cannot match. The 45kg rack weight indicates substantial steel density—this is not a portable home unit. The 122x130x184 cm (L x W x H) footprint occupies approximately 1.6 square meters, yet supports a full spectrum of squat variations, bodybuilding movements, and accessory work.
Standard power racks often use 50x50x2mm or 75x75x3mm tubing. This rack uses 50x70mm rectangular tubing with a 2.5mm wall thickness. The rectangular profile provides directional strength—the 70mm dimension oriented vertically increases column buckling resistance compared to a square tube of equal wall thickness. For a rack weighing 45kg total, the tubing selection balances portability for assembly with rigidity for loaded squats exceeding 200kg.
The 2.5mm wall sits in a sweet spot: thinner than heavy-commercial 3mm racks (reducing shipping costs from China), but thicker than light-commercial 2mm racks that show flex during rack pulls or heavy unracks. The 36,000 units annual production capacity suggests mature manufacturing processes with consistent weld quality, though each unit ships as a carton-packed knock-down for final assembly at destination.
| Parameter | Specification | Design Implication |
|---|---|---|
| Tubing Dimensions | 50mm x 70mm rectangle | Directional strength for vertical load paths |
| Wall Thickness | 2.5mm steel | Mid-commercial grade, balances weight vs. rigidity |
| Total Rack Weight | 45kg | Substantial enough for stability, manageable for assembly |
| Footprint (L x W x H) | 122cm x 130cm x 184cm | ~1.6 sq m, fits standard 2m x 2m training zone |
| Finish | Satin black powder coat | Corrosion-resistant, neutral facility integration |
The product description emphasizes a collaborative process: Solution Specialists work with buyers to customize the rack from start to finish. This indicates an OEM/ODM capability beyond simple color selection. The detachable and universal accessories allow configuration changes post-purchase, meaning the rack evolves with the facility's programming needs.
For a commercial buyer, the customization conversation typically covers three layers: physical dimensions (rack height, depth, or width modifications for specific ceiling heights), accessory package (pull-up bar styles, dip attachments, landmine posts, band pegs, or J-hook quantities), and finish details (color, logo placement, or upright labeling). The carton packed transport method suggests standard packaging, while OEM/ODM acceptance implies custom packaging for larger fleet orders.
Price variability based on product size and color reflects real-world manufacturing economics. Color changes require powder coat line cleaning between batches, adding setup costs. Size changes alter steel consumption and shipping cube calculations. The 1-year warranty period aligns with light-commercial expectations, though facility managers should note that warranty terms vary by region and are subject to localized service conditions.
While labeled as a squat rack, the accessory ecosystem transforms its utility. The detachable nature means the rack can function as:
The universal accessory compatibility is notable. Many rack manufacturers use proprietary hole spacing or pin sizes, locking buyers into their accessory ecosystem. Universal compatibility means third-party J-hooks, safety arms, or storage attachments may fit, reducing long-term replacement costs.
| Parameter | Available Options | Commercial Implication |
|---|---|---|
| Rack Customization | OEM / ODM accepted | Bespoke dimensions or branding available for fleet orders |
| Color Options | Custom colors beyond satin black | Brand matching or facility zone differentiation |
| Accessory Type | Detachable and universal fit | Third-party compatibility, future expansion flexibility |
| Packaging | Carton packed (knock-down) | Reduced shipping volume, on-site assembly required |
| Annual Capacity | 36,000 units | Scalable for large commercial rollouts |
The 184cm height requires standard ceiling clearance (minimum 220cm recommended for overhead loading of barbells). The 130cm depth provides sufficient stability for heavy squats without requiring rear stabilizer feet, assuming proper assembly of base connections. The 122cm width accommodates standard 48-inch bench widths with clearance on both sides.
Assembly complexity for a 45kg knock-down rack is moderate. Two people can typically complete assembly within 60-90 minutes using included hardware. The carton packed transport method means the rack arrives as steel tubes, bolts, and components, not as a pre-assembled unit. Commercial buyers ordering multiple units should allocate assembly labor hours accordingly.
The 1-year warranty covers manufacturing defects but not wear items (J-hook liners, bolt tension, or powder coat scratches from use). For high-turnover commercial environments, facility managers should consider ordering spare J-hooks and safety arms at initial purchase to avoid downtime later. The universal accessory compatibility reduces proprietary replacement risk.
From a training programming perspective, the 184cm height allows full pull-up range for users up to 185cm tall (assuming arms extend 50cm overhead). Taller athletes may need to perform pull-ups with bent knees or use the rack for other exercises. The 45kg rack weight combined with the 2.5mm wall thickness suggests the rack can safely support loaded squats in the 250-300kg range, though specific capacity testing would require manufacturer load ratings.
| Specification Category | Technical Details |
|---|---|
| Product Name | Squat Rack / Multi-function Combination Strength Power Rack |
| Place of Origin | China |
| Brand Name | Leadman |
| Material | Steel (50 x 70mm rectangular tubing, 2.5mm wall) |
| Rack Weight | 45 kg |
| Dimensions (L x W x H) | 122 cm x 130 cm x 184 cm |
| Color / Finish | Satin black powder coat finish (custom colors available) |
| Accessory Compatibility | Detachable and universal fit |
| Warranty Period | 1 year (subject to localized service terms) |
| Customization Level | OEM / ODM accepted (design, size, color, branding) |
| Transport Package | Carton packed (knock-down for assembly) |
| Annual Production Capacity | 36,000 units |
| Primary Use | Workout squat bodybuilding machine / strength training |
